RM5000-4 External Rain to Mains System
Contact us for assistance choosing a pump
The RM5000-4 features a Submersible Multistage Pressure Pump with integral controller, specifically designed for fast and easy installation. The system is 100% European made, guaranteeing exceptional quality and performance in Rainwater supply applications. This system is suitable for underground tanks and best suited for supply to toilet, laundry and garden taps/outlets.
Contact us for assistance choosing a pump
The RM5000-4 features a Submersible Multistage Pressure Pump with integral controller, specifically designed for fast and easy installation. The system is 100% European made, guaranteeing exceptional quality and performance in Rainwater supply applications. This system is suitable for underground tanks and best suited for supply to toilet, laundry and garden taps/outlets.
Contact us for assistance choosing a pump
The RM5000-4 features a Submersible Multistage Pressure Pump with integral controller, specifically designed for fast and easy installation. The system is 100% European made, guaranteeing exceptional quality and performance in Rainwater supply applications. This system is suitable for underground tanks and best suited for supply to toilet, laundry and garden taps/outlets.
-
House Size & Bathrooms: Small | 1 Bathroom
Power: 240VAC
AMPS: 3.8
P1: 0.85kW
P2: 0.37kW
Max Flow: 80L/min
Max Head: 32m
No. Of Impellers: 3
Cable length: 10
Size: 127mm (⌀), 502mm (H)
-
House Size & Bathrooms: Medium | 2-3 Bathroom
Power: 240VAC
AMPS: 6
P1: 1.25kW
P2: 0.75kW
Max Flow: 90L/min
Max Head: 57m
No. Of Impellers: 5
Cable length: 10
Size: 127mm (⌀), 610mm (H)
Applications:
Bathrooms & Laundry
Whole house - refer to the data table below for sizing
Small commercial / industrial
Garden irrigation
Toilet blocks (up to 6 fixtures)
Construction / mine site offices
Features and Benefits:
Pump:
Automatic start and stop on demand
Mains Flow - 50L/Min
Integrated pressure controller with 220kPa/2.2 bar cut-in
Supplied with 10m H07RN-F cable
Integrated run-dry protection
Internal blockage detection system, which shuts down the pump if debris obstructs the internal check valve
Compact design, water-cooled motor
Thermal overload protection
RM System
Rain to Mains Valve with minimal pressure reduction on mains supply.
Integrated check valve, 100% Hydraulic
Corrosion resistant
Certified to AS/NZS4020 for use with potable water
Construction:
Stainless Steel AISI 304 Pump body, motor shaft, handle, cover, screen
Polymer Impellers, diffusers
Alumina Graphite, lubricated mechanical seal
Valveset made from DZR Brass
3 Year Warranty: This product is covered by a REEFE Infield Service Warranty.